Professional Rescue Innovations
Services
OSHA Industrial Classes
All classes sizes are based on 25 to 30 students.

OSHA General Industry - 10 and 30 Hour Courses
Outreach 10 and 30 hour courses are for both the employee and supervisor, manager,
director level personnel. OSHA’s General Industry training classes cover all businesses
except for maritime and construction. The 10 hour course is geared for the hourly employee
covering the mandatory topics required by OSHA. The 30 hour course is geared to the
supervisor, manager and directors in a company who are responsible for employee safety
and health. At the completion of the courses and passing a written test the students will be
issued the OSHA 10 or OSHA 30 hour general industry course cards.

OSHA Construction Industry - 10 and 30 Hour Courses
Outreach 10 and 30 hour courses are for both the employee and supervisor, manager,
director level personnel. OSHA’s Construction Industry training classes cover all construction
except for maritime and general industry. The 10 hour course is geared for the hourly
employee covering the mandatory topics required by OSHA. The 30 hour course is geared to
the supervisor, manager and directors in a company who are responsible for employee
safety and health. At the completion of the course and passing a written test the students will
be issued the OSHA 10 or OSHA 30 hour construction course cards.

Hearing Conservation
The training class is about 30 minutes to duration. It is primarily for companies that have
work areas where noise is an issue (over 85 decibels) which can lead to accelerated hearing
loss. For businesses with this type of environment, even if it is only one work area, the
OSHA CFR 1910.95 standard is very specific on a company hearing conservation program.
The training includes: types of hearing protection, when and how it is used and the
requirements for the annual audiometric testing which must be given to all affected
employees.
If available at the time of the training class, a training video from OSHA will also be utilized. A
short written quiz is also given to the students (optional) for their personnel records.

Hazard Communication
This is mandatory safety training under OSHA CFR 1910.1200 for all employees if an
employer has hazardous material on the premises. HazCom training covers the employers
hazardous communication program dealing with hazardous chemical, hazardous materials,
labeling, storage, containment, spill control and proper disposal of hazardous material in
compliance with both OSHA and EPA (regulations overlap).
The training class is approximately 1 to 2 hours and will also have a quiz distributed for the
employees personnel file. This training class is mandatory every year on the anniversary the
previous class.

Forklift Training and Certification
This safety training is mandatory for employees under OSHA standard CFR 1910.178 for
employees who are required to operate company owned and leased forklifts as part of their
job. The class covers the OSHA standards for forklift operation and safety.
The training class consists of a power point presentation (by OSHA) discussion, OSHA
training videos and a demonstration on how to conduct a safety inspection of a forklift. There
is a three part quiz for all forklift employees to complete and a company designated driving
test examiner to complete the certification process. The classroom instruction approximately
2 ½ hours. The forklift certification is valid for three years unless the employee is involved in
an accident, near miss, etc.

Lockout/Tag Out
This safety training is mandatory under OSHA standard CFR 1910.147 for all employees
involved in the isolation of energy that may result in injury or death of an employee. Even
though this applies mostly to employees involved in the isolation of the energy, all other
employees must take the training so they are familiar with the procedure in the event they
see a piece of equipment that is not lock it out.
The instruction consists of a power point presentation, discussion and a training video from
OSHA. The time to conduct the classroom instruction approximately 1 to 2 hours in duration.
For employees who will be conducting the actual lockout/tag out, the hands on training will
take approximately an additional 1 hour.

Heat Stress (Hyperthermia)
This safety training is very important for employees who are exposed to the heat of summer
anywhere they work. Heat related stress accounts for several deaths annually. The class
covers how heat stress occurs, symptoms, basic first aid and how to prevent heat stress.
The classroom instruction utilizes a power point presentation, training video from OSHA
(which was filmed in Tucson) and a quiz for the employees training records. The class runs
approximately 1 to 2 hours and is an excellent class for all employees to attend.

Cold Illness (Hypothermia)
This safety training is very important for employees who are exposed to the cool and cold
weather of winter anywhere they work. The class covers how cold related stress occurs,
symptoms, basic first aid and how to prevent cold related stress.
The classroom instruction utilizes a power point presentation, training video from OSHA and
a quiz for the employees training records. The class is 1 to 2 hours and is an excellent class
for all employees to attend.

Confined Space Entry
This is mandatory training under OSHA standard CFR 1910.146 for employees who have to
enter confined spaces where there is a potential for hazardous atmosphere, moving parts,
engulfment, etc. The training will cover confined space permit required and confined space
no permit required, the required PPE (Personal Protective Equipment), atmospheric testing,
respirator requirements, permits, forms, etc. Confined space permit required training includes
additional training, respirator training and fit testing (separate training class) in order to
protect employees and be in compliance.
The classroom instruction is comprised of a power point presentation, OSHA training video
and hands on training. The class is approximately 1 to 2 hours in duration.

Respirator Training
This training is mandatory under OSHA standard CFR1910.134 for employees who wear
dust masks with a valve, full and half face respirators, SCBA’s, etc. This covers the basics
including the wearing of dust masks. Before employees can use the dust masks and
respirators they must submit a respirator medical evaluation form to a medical doctor for
evaluation. For employees who will be wearing respirators they must have a final fit test of
an appropriate respirator.
The training is comprised of an OSHA power point presentation, OSHA training video, hands
on training and a quiz for the employee’s records. Fit test are conducted after a medical
doctor has approved the employee to wear a respirator. The classroom instruction is 1 to 2
hours in duration. The fit testing takes approximately ten minutes per employee.

Back Safety
This safety training is for all employees in shops, field and office environment. Job related
back injury is one of the most common and expensive injuries that occur in the work place.
The training explains the workings of the human back and how to prevent injuries through
proper lifting techniques and the use of mechanical lifting devices.
The training is comprised of a power point presentation, OSHA training video and quiz for
the employee’s records. The class is 1 to 2 hours in duration.

Blood Borne Pathogens
This is mandatory training for employees under the OSHA standard CFR 1910.1030 to
inform employees how to protect themselves in the event of exposure to bodily fluids of
another employee following an injury accident. The training covers how to protect yourself,
reporting procedures and clean up procedures. Also, included in the training is what an
employee must do if exposed.
The class runs is 1 to 2 hours and is comprised of a power point presentation, OSHA training
video and a quiz for the employee records.

Fire Safety and Prevention
This is mandatory training of several OSHA standards which include the following: fire
prevention, emergency evacuation procedures, fire suppression systems, fire extinguisher
usage, flammable material in the workplace, etc.
The training is comprised of a power point presentation, OSHA training video and a quiz for
the employee’s file. The class runs 1 to 2 hours. It is highly recommended having a live fire
extinguisher training session for all employees, conduct by a licensed fire equipment
company.

Electrical Safety
This is a general electrical safety training program under OSHA standards CFR 1910.331
thru .335. The information covered is safe work practices around electricity using hand tools,
ladders, lighting, etc.
The class is comprised of a power point presentation, OSHA safety video and quiz for
employees. The class is 1 to 2 hours in duration.

Fall Protection
This is mandatory training under OSHA standard CFR 1910 Sub Part D, E, F and CFR 1926
for employees who work at a height of six feet or higher. The training covers walking and
working surfaces, personal fall protection, emergency procedures, etc.
The class is comprised of a power point presentation, OSHA training video and a quiz for
employee’s file. The class is 1 to 2 hours in duration.

Ladder Safety
This safety training class under OSHA standard CFR 1910.25 thru .27 is primarily for
employees who use ladders on a regular basis or occasionally in the work place. All
employees should attend this class since most employees also use ladders around the
house.
The class is comprised of a power point presentation, OSHA safety video and quiz for
employee’s file. The class runs approximately 1 to 2 hours.

OSHA Record Keeping
This class is for the employee(s) who are responsible for maintaining the OSHA 300 log and
related documentation which is required under OSHA standard CFR 1904. The OSHA 300
report is required of all employers for tracking job related injuries and illnesses.
The class comprises a power point presentation, and software demo of how the data is
collected for reporting. The class runs approximately 1 to 2 hours.

Scaffold Training
This is mandatory training under OSHA standard CFR 1910.28 for all employees who erect
and work on scaffolding.
The class is comprised of an OSHA power point presentation and OSHA safety training
video. The training class is 1 to 2 hours in length.

Eye Safety and Face Protection
The training is to provide the employees and employer with the information they need to
protect their eyesight. Protection of the eyes is very important and covered under OSHA
standard CFR 1910.133 and 1910.252.
The class covers how the eye works, types of protection available and where the protection
should be worn. The class is 1 to 2 hours in duration.

Slip, Trip and Fall Protection
One of the most common and easily preventable injuries in the workplace is slip, trip and fall
injuries which can result in expensive medical bills and lost time for the employee. This class
is for all employees and covers the mechanics of a fall, recognition of a hazard and how to
prevent the fall.
The class is a power point presentation, OSHA video and runs 1 to 2 hours in duration.

Basic First Aid
Under the OSHA standard 1910.151 the employer should have an employee or several
employees depending on the size of the organization trained in first aid and have an
adequate first aid kit(s) on site. The first aid training includes site specific first aid concerns
plus normal first aid concerns.
On site basic first aid training class is three to four hours in length and is comprised of power
point presentations, training video and hands on demo. The training will also cover Blood
borne Pathogens in greater detail then the normal OSHA requirement. The training is
conducted in accordance with AHA (American Heart Association) standards.

CPR/AED Training
In the OSHA brochure 3317-06N on the fundamentals of first aid in the workplace CPR/AED
are also covered. With the advent of technology AED's (Automatic External Defibrillator) are
safer, easier to use and are now affordable to all businesses. It is estimated that of all
sudden coronary arrest in the workplace approximately 95% are fatal due to the lack of
personnel trained in CPR and the use of AED's.
On site training is available for employees who are interested in becoming certified in CPR
and the use of an AED. The course is comprised of power point, video, hands on training
and hands on evaluation of CPR and the use of an AED. The class is four and half hours
long due to the nature of the material and information. The training is conducted in
accordance with the Red Cross and American Heart Association standards. Blood borne
Pathogens will be covered in greater detail than the OSHA requirements.  Allow
approximately 4 to 5 hours depending on size of class.

Excavation Safety
Under the OSHA standard CFR 1926 Subpart P, all employees must be trained in hazard
recognition and the proper way of working in and around construction excavations sites. The
standard covers general requirements, soil classification, sloping and benching, timber
shoring for trenches, aluminum hydraulic shoring, alternatives to timber shoring, selection of
PPE.
Due to the amount of material that is covered this training class runs approximately 4 to 5
hours. A quiz will be given at the end of the training class.
Specialized safety training classes can be developed for the client with specific training
requirements.

ARC Flash Training, NFPA 70E
Course Description:
Learn how current OSHA standards apply to your facility, including NFPA 70E.
Safe installation and maintenance of electrical equipment.
Understand OSHA penalties for noncompliance.
Personal protective equipment and grouping.
This course will be 8 hour course to outline NFPA 70E and how it effects your workplace.  
Professional Rescue Innovations is pleased to announce that it now offers OSHA
Outreach training classes. The classes can be conducted at your location. For the OSHA
General Industry and Construction 10 and 30 hour classes contact us via phone or e-mail
for course price.